AQUAS SMR62 Series – Sludge Interface Level Meter

AQUAS SMR62 Series – Sludge Interface Level Meter adalah alat yang terhubung langsung melalui antarmuka komunikasi RS485, menyediakan data proses yang sederhana, andal, dan hemat biaya dengan kemampuan pemantauan, kalibrasi, konfigurasi, dan diagnostik jarak jauh. Perumahan di kandang bukti IP68 yang kuat, 1500 N kekuatan tarik kabel Kevlar diperkuat, transmisi data digital hingga 1,2 km, pemancar idealnya digunakan dalam air limbah, sungai, aplikasi pemantauan saluran irigasi.

*Catatan

Untuk mengetahui informasi terkait harga, silahkan hubungi kami sekarang juga!

Fitur:

  • All-in-One Compact Housing, Built-in Transmitter and Sensor
  • Robust IP68 Water Submersible Protection
  • Plug & Play, On-line Realtime Measurement
  • Ultra Low Power Consumption, Ideal for Outdoor Applications
  • 1500 N Tensile Strength Kevlar Reinforced Cable
  • Surge Protection for Power and RS485 Communication
  • RS485 Digital Communication, Minimize Cabling and Engineering Cost
  • Perfect Solution for High Suspended Solids Conditions
  • Simultaneously Measuring Sludge Interface and Water Level
  • Standard Modbus RTU Protocol, Direct Connected with PLC, HMI
  • Onboard Memory Allowing Users Easily Calibrate and Configure Sensor at Lab and Distribute to Various Fields and Sites
  • Software Tool for Data Monitoring, Calibration, Configuration and Diagnosis

Aplikasi

  • Air tanah
  • Air limbah
  • Air permukaan
  • Air keran
Bagikan ke:

Spesifikasi

MEASUREMENT METHOD
Conductivity measurement technology with state-of-the-art DSP signal processing to provide a reliable and accurate way to measure sludge interface level.
GENERAL
Output Signal RS485 (Modbus RTU protocol),19,200 bps, 8 data bits, no parity, 1 stop bit; 4~20 mA
Data Resolution 16 bits (0.001% FS)
Surge Protection 4000 V DC
Power 5~12 VDC, 100 mA
Protection Polarity, Overload, Short circuit
Safety CE, FCC
MEASUREMENT
Range SMR62-1: 0~1.2 m
SMR62-2: 0~2 m
SMR62-3: 0~4 m
Accuracy 2.5 cm
Resolution 0.1 cm
Operating temperature -20~85 °C
Response time 10 sec
Protection IP68
Housing ABS
Dimensions SMR62-1: 1450(H) x 50(W) x 20(D) mm
SMR62-2: 2250(H) x 50(W) x 20(D) mm
SMR62-3: 4250(H) x 50(W) x 20(D) mm
Weight Transmitter: approx. 2.5 Kg ; cable: 80 g/m
Bagikan ke:
× Hubungi kami!