Color Analyzer – AQUAS SMR47 Series
Color Analyzer – AQUAS SMR47 Series, Color Analyzer terhubung langsung melalui antarmuka komunikasi RS485, menyediakan data proses yang sederhana, andal, dan hemat biaya dengan kemampuan pemantauan, kalibrasi, konfigurasi, dan diagnostik jarak jauh. Perumahan Color Meter dalam selungkup bukti IP68 yang kuat, kabel yang diperkuat dengan kekuatan tarik 1500 N Kevlar, transmisi data digital hingga 1,2 km, pemancar ini ideal digunakan dalam industri air/air limbah.
*Catatan
Untuk mengetahui informasi terkait harga, silahkan hubungi kami sekarang juga!
Fitur:
- All-in-One Compact Housing, Built-in Transmitter and Sensors
- Robust IP68 Water Submersible Protection, Directly Installed in the Field, No Cabinet Required
- Plug & Play, On-line Realtime Measurement
- Ultra Low Power Consumption, Ideal for Outdoor Applications
- 1500 N Tensile Strength Kevlar Reinforced Cable
- Surge Protection for Power and RS485 Communication
- RS485 Digital Communication, Minimize Cabling and Engineering Cost
- Standard Modbus RTU Protocol, Direct Connected with PLC, HMI
- Sapphire Glass Windows to Prevent Scratch
- Innovative Nano Coating to Remain Window Clean
- Auto Cleaning Wiper, Less Maintenance
- Turbidity Measurement and Compensation
- Onboard Memory Allowing Users Easily Calibrate and Configure Sensor at Lab and Distribute to Various Fields and Sites
- AQCFG Software Tool for Data Monitoring, Calibration, Configuration and Diagnosis
- IECEx/ATEX Ex ia IIB T5 Ga Explosive Proof Certification
Spesifikasi
| MEASUREMENT METHOD | |
| The analyzer consists of a light source, a sample cell, and a light detector (photo detector). Incident light is absorbed by the sample, and the light is | |
| measured by the detector. The value depends on the amount of absorbance in the sample. The transmitter uses a long life LED and the 180° light | |
| method in accordance with International standard to assure accurate measurement values. An automated mechanical wiper is utilized to remain | |
| surface clean and remove air bubbles of the optical window in order to maximize the accuracy and minimize the maintenance requirement. | |
| INSTALLATION | |
| Submersible, flow through, pipe Insertion | |
| GENERAL | |
| Output Signal | Rs485 (Modbus RTU protocol), 19,200 bps, 8 data bits, no parity, 1 stop bit; 4~20 mA (optional) |
| Data Resolution | 16 bits (0.001% FS) |
| Surge Protection | 4000 V DC |
| Power | 5~12 VDC, 45 mA |
| Protection | Polarity, Overload, Short circuit |
| Safety | CE, FCC |
| COLOR MEASUREMENT | |
| Range | SMR47-1: 0~100 Hazen (Pt/Co, APHA, PCU)(100 mm) |
| SMR47-2: 0~500 Hazen (Pt/Co, APHA, PCU)(20 mm) | |
| SMR47-3: 0~2,000 Hazen (Pt/Co, APHA, PCU)(5 mm) | |
| Accuracy | ±5%±1 Hazen in standard solution |
| Resolution | 0.01 Hazen (Pt/Co) |
| Repeatability | ±3% Hazen in standard solution |
| Light source | LED 390 nm |
| Beam angle | 180° |
| Light Path Length | 5, 20, 100 mm |
| Process Flow Rate | Max. 3m/sec |
| Operation pressure | Max. 10 Kgf/cm² |
| Operating temperature | 0 ~ 60°C |
| Response time | 1 sec |
| TURBIDITY MEASUREMENT | |
| Light source | LED 880 nm |
| Range | 0~1,000 NTU |
| Accuracy | ±3% measured value |
| Resolution | 0.001 NTU |
| Repeatability | ±1% measured value |
| PROTECTION | IP68 |
| CONNECTION | 1”-11 PT, 5-pin M16 plug |
| HOUSING | SS316L; Titanium |
| DIMENSIONS | Φ 50 X 305 mm |
| WEIGHT | analyzer: approx. 1 Kg (SS316L); approx. 0.8 Kg (Titanium) |
| Cable: 80 g/m | |
