Dissolved Organic Carbon Analyzer – AQUAS SMR74

AQUAS SMR74 – Dissolved Organic Carbon Analyzer atau DOC (karbon organik terlarut) adalah Dissolved Organic Carbon Analyzer yang terhubung langsung melalui antarmuka komunikasi RS485, menyediakan data proses yang sederhana, andal, dan hemat biaya dengan kemampuan pemantauan, kalibrasi, konfigurasi, dan diagnostik jarak jauh. Perumahan Pengukur Karbon Organik Terlarut dalam penutup tahan IP68 yang kuat, kabel yang diperkuat Kevlar dengan kekuatan tarik 1500 N, transmisi data digital hingga 1,2 km, Penganalisis DOC atau meteran DOC idealnya digunakan dalam industri air/air limbah.

*Catatan

Untuk mengetahui informasi terkait harga, silahkan hubungi kami sekarang juga!

Fitur:

  • All-in-One Compact Housing, Built-in Transmitter and Sensor
  • Robust IP68 Water Submersible Protection, Directly Installed in the Field, No Cabinet Required
  • Plug & Play, On-line Realtime Measurement
  • Ultra Low Power Consumption, Ideal for Outdoor Applications
  • 1500 N Tensile Strength Kevlar Reinforced Cable
  • Surge Protection for Power and RS485 Communication
  • RS485 Digital Communication, Minimize Cabling and Engineering Cost
  • Standard Modbus RTU Protocol, Direct Connected with PLC, HMI
  • Sapphire Glass Windows to Prevent Scratch
  • Innovative Nano Coating to Remain Window Clean
  • Auto Cleaning Wiper, Less Maintenance
  • Turbidity Measurement and Compensation
  • Onboard Memory Allowing Users Easily Calibrate and Configure Sensor at Lab and Distribute to Various Fields and Sites
  • AQCFG Software Tool for Data Monitoring, Calibration, Configuration and Diagnosis
  • IECEx/ATEX Ex ia IIB T5 Ga Explosive Proof Certification

Aplikasi

  • Air minum
  • Air permukaan
  • Industri
  • Pengolahan air
  • Air limbah
Bagikan ke:

Spesifikasi

MEASUREMENT METHOD
and the light is measured by the detector. The value depends on the amount of absorbance in the sample. The transmitter uses a long life LED and and the light is measured by the detector. The value depends on the amount of absorbance in the sample. The transmitter uses a long life LED and the 180° light method in accordance with International standard to assure accurate measurement values. An automated mechanical wiper is to remain surface clean and remove air bubbles of the optical window in order to maximize the accuracy and minimize the maintenance requirement
INSTALLATION
Submersible, flow through, pipe Insertion
GENERAL
Output Signal RS485 (Modbus RTU protocol),19,200 bps, 8 data bits, no parity, 1 stop bit
Data Resolution 16 bits (0.001% FS)
Surge Protection 4000 V DC
Power 5~12 VDC, 100 mA
Protection Polarity, Overload, Short circuit
Safety CE, FCC
DOC MEASUREMENT
Range SMR74-1: 0~20 mg/L (20 mm)
SMR74-2: 0~100 mg/L (5 mm)
SMR74-3: 0~500 mg/L (1 mm)
Accuracy ±5% in standard solution
Resolution 0.01 mg/L
Repeatability ±3% in standard solution
Light source LED 254 nm
Beam angle 180°
Light Path Length 1, 5, 20 mm
Operation pressure Max. 10 Kgf/cm²
Operating temperature 0 ~ 50 °C
Response time 3 sec
TURBIDITY MEASUREMENT
Range SMR74-1: 0~100 NTU
SMR74-2: 0~500 NTU
SMR74-3: 0~2000 NTU
Accuracy ±5% measured value
Resolution 0.01 NTU
Repeatability ±3% measured value
PROTECTION IP68
CONNECTION 1”-11 PT, 5-pin M16 plug
HOUSING POM
DIMENSIONS SMR74-1: Φ 50 x 305 mm
SMR74-2: Φ 50Χ290 mm
SMR74-3: Φ 50Χ287 mm
WEIGHT Analyzer: approx. 1 Kg; (SS316L); 0.8 Kg (Titanium)
Cable: 80 g/m
Bagikan ke:
× Hubungi kami!