SKC QuickTake 30 Sample Pump

*Catatan

Untuk mengetahui informasi terkait harga, silahkan hubungi kami sekarang juga!

Deskripsi
Spesifikasi

QuickTake 30 Sample Pump Mold, Bioaerosol, Dust, and Asbestos Sampling,

Fitur:

Aliran konstan dari 10 hingga 30 L/mnt
Ideal untuk digunakan dengan
- Penabrak kaskade yang layak termasuk SKC BioStage®
- Kaset perangkap spora seperti VersaTrap®
- Sampler cetakan rongga dinding
- Kaset mikrovakum
- Sampler lain yang membutuhkan aliran hingga 30 L/mnt
- SKC IOM Sampler pada aliran dari 8,2 hingga 10,64 L/mnt
Waktu jangka panjang
- Pengisi daya/adaptor AC untuk pengambilan sampel yang diperpanjang
- Paket baterai lithium-ion (Li-Ion) isi ulang yang andal
Kompak dan portabel
- Beratnya hanya 4,8 pon (2,2 kg)
- Pegangan agar mudah dibawa
Mudah digunakan
- Kontrol keypad besar
- Alarm yang terlihat dan terdengar di akhir siklus
Tampilan digital kontras tinggi
Kebisingan rendah — rata-rata < 64 dBA pada 3 kaki (37-mm, filter MCE 0,8-μm pada 16,8 L/mnt)

Ordering Information:

QuickTake 30 requires 3/8-inch ID tubing.

Pump and Kits

QuickTake 30 Sample Pump*† and charger

QuickTake 30 Sample Pump,*† Rotameter, and Charger

QuickTake 30 BioStage Pump*† Kit includes pump, charger, rotameter, Standard

BioStage, mounting bracket with inlet adapter, calibration adapter, and deluxe carry case

Accessories

Charger/Adapter

Mounting Bracket for BioStage includes inlet adapter

Rotameter, for QuickTake 30

Replacement Battery Pack,* Li-Ion

Replacement Filter/O-ring Set includes 5 filters and 1 O-ring

Recommended Accessories

Mounting Bracket for BioStage Impactor

Rotameter

* QuickTake sample pumps contain Li-Ion batteries and are subject to special shipping regulations
† Use in non-explosive environments only. Not UL Listed for intrinsic safety
Note: Replacing batteries with non-approved battery packs voids any warranty..

Spesifikasi

Performance Proﬁle		Quick View
Flow Control Accuracy	± 5% of set-point after calibration	Flow Rate (L/min)
Flow Rate (L/min)	Flow Rate (L/min)	Flow Rate (L/min)
	5 hrs at 15 L/min with spore trap cassette (VersaTrap)‡	Weight in Pounds (kilograms)
	4 hrs at 28.3 L/min with BioStage viable cascade impactor	4.8 (2.2)
Charge Time (varies with battery capacity and level of discharge)	Approximately 5 hrs with approved charge	Compensation Range (inches water)
		Up to 15 at 30 L
		Built-in Timer/Clock
Temperature Range	Operating: 32° to 104° F (0° to 40° C)	Constant Flow
	Storage: -4° to 95° F (-20° to 35° C)	Programmable
	Charging: 32° to 113° F (0° to 45° C)	Flow Fault Feature
Operating Humidity	0 to 95% non-condensing	Battery Type
Timer Display Range	1 to 999 min. If run time exceeds 999 min, timer display rolls over and repeats 1 to 999-minute runs until user stops pump or power supply is depleted.	Li-Ion Battery (7.4 V, 10.4 Ah, 77 Wh) and/or AC Adapter
Flow Fault	If the pump is not able to compensate due to excessive back pressure, a ﬂashing FlOF will appear on the LED. If the fault is not corrected within ﬁve seconds, the pump will beep four times and stop running.	Battery Check
		Tubing
		Requires 3/8-inch ID tubing
‡ Sampling time is usually ≤ 10 minutes; however, SKC recommends reducing length of sample time when using a 30 L/min ﬂow rate to prevent overloading the media